CPU 317-2 PNDP

Ship to Stock in: Warehouse

CPU 317-2 PNDP

★★★★★4.91484 Reviews

Wholesale Price

Model: 6ES7317-2EK14-0AB0

Order No:

SKU: 10000004001201

Category: S7-300

Brand: SIEMENS

Size: 12.80CM, 15.20CM, 5.20CM,0.00cm

Weight: 0.00Kg

Product Selection Engineer: Huankanheng

Leading

Customer Service Guarantee

100% secure payment

Quality Guarantee

No Reason Returns

You May Also Like

Selling List

Description Reviews

6ES7317-2EK14-0AB0 CPU317-2 PN/DP, 1 MB

Artikelnummer

6ES7317-2EK14-0AB0

		SIMATIC S7-300 CPU 317-2 PN/DP, CENTRAL PROCESSING UNIT WITH 1 MB WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, MICRO MEMORY CARD NECESSARY
Product type designation
General information
Hardware product version		01
Firmware version		V3.2
Engineering with
● Programming package		STEP7 V 5.5 or higher
Supply voltage
24 V DC		Yes
permissible range, lower limit (DC)		20.4 V
permissible range, upper limit (DC)		28.8 V
External protection for supply cables (recommendation)		2 A min.
Mains buffering
● Mains/voltage failure stored energy time		5 ms
● Repeat rate, min.		1 s
Input current
Current consumption (rated value)		750 mA
Current consumption (in no-load operation), typ.		150 mA
Inrush current, typ.		4 A
I²t		1 A²·s
Power losses
Power loss, typ.		4.65 W
Memory
Type of memory		other
Work memory
● Integrated		1 024 kbyte
● expandable		No
● Size of retentive memory for retentive data blocks		256 kbyte
Load memory
● pluggable (MMC)		Yes
● pluggable (MMC), max.		8 Mbyte
● Data management on MMC (after last programming), min.		10 y
Backup
● present		Yes; Guaranteed by MMC (maintenance-free)
● without battery		Yes; Program and data
CPU processing times
for bit operations, typ.		0.025 µs
for word operations, typ.		0.03 µs
for fixed point arithmetic, typ.		0.04 µs
for floating point arithmetic, typ.		0.16 µs
CPU-blocks
Number of blocks (total)		2 048; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
● Number, max.		2 048; Number range: 1 to 16000
● Size, max.		64 kbyte
FB
● Number, max.		2 048; Number range: 0 to 7999
● Size, max.		64 kbyte
FC
● Number, max.		2 048; Number range: 0 to 7999
● Size, max.		64 kbyte
OB
● Size, max.		64 kbyte
● Number of free cycle OBs		1; OB 1
● Number of time alarm OBs		1; OB 10
● Number of delay alarm OBs		2; OB 20, 21
● Number of time interrupt OBs		4; OB 32, 33, 34, 35
● Number of process alarm OBs		1; OB 40
● Number of DPV1 alarm OBs		3; OB 55, 56, 57
● Number isochronous mode OBs		1; OB 61 - isochronous mode is possible either on DP or PROFINET IO (not simultaneously)
● Number of startup OBs		1; OB 100
● Number of asynchronous error OBs		6; OB 80, 82, 83, 85, 86, 87 (OB83 only for PROFINET IO)
● Number of synchronous error OBs		2; OB 121, 122
Nesting depth
● per priority class		16
● additional within an error OB		4
Counters, timers and their retentivity
S7 counter
● Number		512
Retentivity
— can be set		Yes
— lower limit		0
— upper limit		511
— preset		Z 0 to Z 7
Counting range
— can be set		Yes
— lower limit		0
— upper limit		999
IEC counter
● present		Yes
● Type		SFB
● Number		Unlimited (limited only by RAM capacity)
S7 times
● Number		512
Retentivity
— can be set		Yes
— lower limit		0
— upper limit		511
— preset		No retentivity
Time range
— lower limit		10 ms
— upper limit		9 990 s
IEC timer
● present		Yes
● Type		SFB
● Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area, total		All, max. 256 KB
Flag
● Number, max.		4 096 byte
● Retentivity available		Yes; From MB 0 to MB 4095
● Retentivity preset		MB 0 to MB 15
● Number of clock memories		8; 1 memory byte
Data blocks
● Number, max.		2 048; Number range: 1 to 16000
● Size, max.		64 kbyte
● Retentivity adjustable		Yes; via non-retain property on DB
● Retentivity preset		Yes
Local data
● per priority class, max.		32 768 byte; Max. 2048 bytes per block
Address area
I/O address area
● Inputs		8 192 byte
● Outputs		8 192 byte
of which, distributed
— Inputs		8 192 byte
— Outputs		8 192 byte
Process image
● Inputs		8 192 byte
● Outputs		8 192 byte
● Inputs, adjustable		8 192 byte
● Outputs, adjustable		8 192 byte
● Inputs, default		256 byte
● Outputs, default		256 byte
Subprocess images
● Number of subprocess images, max.		1; With PROFINET IO, the length of the user data is limited to 1600 bytes
Digital channels
● Inputs		65 536
● Outputs		65 536
● Inputs, of which central		1 024
● Outputs, of which central		1 024
Analog channels
● Inputs		4 096
● Outputs		4 096
● Inputs, of which central		256
● Outputs, of which central		256
Hardware configuration
Expansion devices, max.		3
Number of DP masters
● Integrated		1
● Via CP		4
Number of operable FMs and CPs (recommended)
● FM		8
● CP, point-to-point		8
● CP, LAN		10
Rack
● Racks, max.		4
● Modules per rack, max.		8
Time of day
Clock
● Hardware clock (real-time clock)		Yes
● battery-backed and synchronizable		Yes
● Deviation per day, max.		10 s; Typ.: 2 s
● Backup time		6 wk; At 40 °C ambient temperature
● Behavior of the clock following POWER-ON		Clock continues running after POWER OFF
● Behavior of the clock following expiry of backup period		Clock continues to run with the time at which the power failure occurred
Operating hours counter
● Number		4
● Number/Number range		0 to 3
● Range of values		0 to 2^31 hours (when using SFC 101)
● Granularity		1 hour
● retentive		Yes; Must be restarted at each restart
Clock synchronization
● supported		Yes
● to MPI, master		Yes
● to MPI, slave		Yes
● to DP, master		Yes; With DP slave only slave clock
● to DP, slave		Yes
● in AS, master		Yes
● in AS, slave		Yes
● on Ethernet via NTP		Yes; As client
Digital inputs
Number of digital inputs		0
Digital outputs
Number of digital outputs		0
Analog inputs
Number of analog inputs		0
Analog outputs
Number of analog outputs		0
Interfaces
Number of USB interfaces		0
Number of parallel interfaces		0
Number of 20 mA interfaces (TTY)		0
Number of RS 232 interfaces		0
Number of RS 422 interfaces		0
Number of other interfaces		1; Ethernet, 2-port switch, 2*RJ45
1st interface
Interface type		Integrated RS 485 interface
Physics		RS 485
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		200 mA
Functionality
● MPI		Yes
● DP master		Yes
● DP slave		Yes
● Point-to-point connection		No
MPI
● Transmission rate, max.		12 Mbit/s
Services
— PG/OP communication		Yes
— Routing		Yes
— Global data communication		Yes
— S7 basic communication		Yes
— S7 communication		Yes
— S7 communication, as client		No; but via CP and loadable FB
— S7 communication, as server		Yes
DP master
● Transmission rate, max.		12 Mbit/s
● Number of DP slaves, max.		124
Services
— PG/OP communication		Yes
— Routing		Yes
— Global data communication		No
— S7 basic communication		Yes; I blocks only
— S7 communication		Yes
— S7 communication, as client		No
— S7 communication, as server		Yes
— Equidistance mode support		Yes
— Isochronous mode		Yes; OB 61; isochronous mode can only be used alternatively on PROFIBUS DP or PROFINET IO
— SYNC/FREEZE		Yes
— Activation/deactivation of DP slaves		Yes
— Number of DP slaves that can be simultaneously activated/deactivated, max.		8
— Direct data exchange (slave-to-slave communication)		Yes; As subscriber
— DPV1		Yes
Address area
— Inputs, max.		8 kbyte
— Outputs, max.		8 kbyte
User data per DP slave
— Inputs, max.		244 byte
— Outputs, max.		244 byte
DP slave
● Transmission rate, max.		12 Mbit/s
● Automatic baud rate search		Yes; only with passive interface
● Address area, max.		32
● User data per address area, max.		32 byte
Services
— PG/OP communication		Yes
— Routing		Yes; Only with active interface
— Global data communication		No
— S7 basic communication		No
— S7 communication		Yes
— S7 communication, as client		No
— S7 communication, as server		Yes; Connection configured on one side only
— Direct data exchange (slave-to-slave communication)		Yes
— DPV1		No
Transfer memory
— Inputs		244 byte
— Outputs		244 byte
2nd interface
Interface type		PROFINET
Physics		Ethernet RJ45
Isolated		Yes
Integrated switch		Yes
Number of ports		2
Automatic detection of transmission speed		Yes; 10/100 Mbit/s
Autonegotiation		Yes
Autocrossing		Yes
Change of IP address at runtime, supported		Yes
Media redundancy
● supported		Yes
● Switchover time on line break, typically		200 ms; PROFINET MRP
● Number of stations in the ring, max.		50
Functionality
● MPI		No
● DP master		No
● DP slave		No
● PROFINET IO Controller		Yes; Also simultaneously with IO-Device functionality
● PROFINET IO Device		Yes; Also simultaneously with IO Controller functionality
● PROFINET CBA		Yes
● Open IE communication		Yes; Via TCP/IP, ISO on TCP, and UDP
● Web server		Yes
— Number of HTTP clients		5
PROFINET IO Controller
● Transmission rate, max.		100 Mbit/s
● Number of connectable IO devices, max.		128
● Max. number of connectable IO devices for RT		128
— of which in line, max.		128
● Number of IO devices with IRT and the option "high flexibility"		128
— of which in line, max.		61
● Number of IO Devices with IRT and the option "high performance", max.		64
— of which in line, max.		64
● IRT, supported		Yes
● Shared device, supported		Yes
● Prioritized startup supported		Yes
— Number of IO Devices, max.		32
● Activation/deactivation of IO Devices		Yes
— Maximum number of IO devices that can be activated/deactivated at the same time.		8
● IO Devices changing during operation (partner ports), supported		Yes
— Max. number of IO devices per tool		8
● Device replacement without swap medium		Yes
● Send cycles		250 μs, 500 μs,1 ms; 2 ms, 4 ms (not in the case of IRT with "high flexibility" option)
● Updating time		250 µs to 512 ms (depending on the operating mode, see Manual "S7-300 CPU 31xC and CPU 31x, Technical Data" for more details)
Services
— PG/OP communication		Yes
— Routing		Yes
— S7 communication		Yes; with loadable FBs, max. configurable connections: 16, max. number of instances: 32
— Isochronous mode		Yes; OB 61; isochronous mode can only be used alternatively on PROFIBUS DP or PROFINET IO
— Open IE communication		Yes; Via TCP/IP, ISO on TCP, and UDP
Address area
— Inputs, max.		8 kbyte
— Outputs, max.		8 kbyte
— User data consistency, max.		1 024 byte
PROFINET IO Device
Services
— PG/OP communication		Yes
— Routing		Yes
— S7 communication		Yes; with loadable FBs, max. configurable connections: 16, max. number of instances: 32
— Isochronous mode		No
— Open IE communication		Yes; Via TCP/IP, ISO on TCP, and UDP
— IRT		Yes
— PROFIenergy, supported		Yes; With SFB 73 / 74 prepared for loadable PROFIenergy standard FB for I-Device
— Shared device		Yes
— Number of IO controllers with shared device, max.		2
Transfer memory
— Inputs, max.		1 440 byte; Per IO Controller with shared device
— Outputs, max.		1 440 byte; Per IO Controller with shared device
Submodules
— Number, max.		64
— User data per submodule, max.		1 024 byte
PROFINET CBA
● acyclic transmission		Yes
● Cyclic transmission		Yes
Open IE communication
● Open IE communication, supported		Yes
● Number of connections, max.		16
● Local port numbers used at the system end		0, 20, 21, 23, 25, 80, 102, 135, 161, 443, 8080, 34962, 34963, 34964, 65532, 65533, 65534, 65535
● Keep-alive function, supported		Yes
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes; Via PROFIBUS DP or PROFINET interface
Communication functions
PG/OP communication		Yes
Data record routing		Yes
Global data communication
● supported		Yes
● Number of GD loops, max.		8
● Number of GD packets, max.		8
● Number of GD packets, transmitter, max.		8
● Number of GD packets, receiver, max.		8
● Size of GD packets, max.		22 byte
● Size of GD packet (of which consistent), max.		22 byte
S7 basic communication
● supported		Yes
● User data per job, max.		76 byte
● User data per job (of which consistent), max.		76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
● supported		Yes
● as server		Yes
● As client		Yes; via integrated PROFINET interface and loadable FB or via CP and loadable FB
● User data per job, max.		See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication)
S5-compatible communication
● supported		Yes; via CP and loadable FC
Open IE communication
● TCP/IP		Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max.		16
— Data length for connection type 01H, max.		1 460 byte
— Data length for connection type 11H, max.		32 768 byte
— Several passive connections per port, supported		Yes
● ISO-on-TCP (RFC1006)		Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max.		16
— Data length, max.		32 768 byte
● UDP		Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max.		16
— Data length, max.		1 472 byte
Web server
● supported		Yes
● Number of HTTP clients		5
● User-defined websites		Yes
PROFINET CBA (at set setpoint communication load)
● Setpoint for the CPU communication load		50 %
● Number of remote interconnection partners		32
● Number of functions, master/slave		30
● Total of all Master/Slave connections		1 000
● Data length of all incoming connections master/slave, max.		4 000 byte
● Data length of all outgoing connections master/slave, max.		4 000 byte
● Number of device-internal and PROFIBUS interconnections		500
● Data length of device-internal und PROFIBUS interconnections, max.		4 000 byte
● Data length per connection, max.		1 400 byte
Remote interconnections with acyclic transmission
— Sampling frequency: Sampling time, min.		500 ms
— Number of incoming interconnections		100
— Number of outgoing interconnections		100
— Data length of all incoming interconnections, max.		2 000 byte
— Data length of all outgoing interconnections, max.		2 000 byte
— Data length per connection, max.		1 400 byte
Remote interconnections with cyclic transmission
— Transmission frequency: Transmission interval, min.		10 ms
— Number of incoming interconnections		200
— Number of outgoing interconnections		200
— Data length of all incoming interconnections, max.		2 000 byte
— Data length of all outgoing interconnections, max.		2 000 byte
— Data length per connection, max.		450 byte
HMI variables via PROFINET (acyclic)
— Number of stations that can log on for HMI variables (PN OPC/iMap)		3; 2x PN OPC/1x iMap
— HMI variable updating		500 ms
— Number of HMI variables		200
— Data length of all HMI variables, max.		2 000 byte
PROFIBUS proxy functionality
— supported		Yes
— Number of linked PROFIBUS devices		16
— Data length per connection, max.		240 byte; Slave-dependent
Number of connections
● overall		32
● usable for PG communication		31
— reserved for PG communication		1
— Adjustable for PG communication, min.		1
— Adjustable for PG communication, max.		31
● usable for OP communication		31
— reserved for OP communication		1
— adjustable for OP communication, min.		1
— adjustable for OP communication, max.		31
● usable for S7 basic communication		30
— Reserved for S7 basic communication		0
— adjustable for S7 basic communication, min.		0
— adjustable for S7 basic communication, max.		30
● usable for S7 communication		16
— reserved for S7 communication		0
— Adjustable for S7 communication, min.		0
— Adjustable for S7 communication, max.		16
● Max. total number of instances		32
● usable for routing		X1 as MPI: max. 10; X1 as DP master: max. 24; X1 as DP slave (active): max. 14; X2 as PROFINET: 24 max.
S7 message functions
Number of login stations for message functions, max.		32; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages		Yes
simultaneously active Alarm-S blocks, max.		300
Test commissioning functions
Status block		Yes; Up to 2 simultaneously
Single step		Yes
Number of breakpoints		4
Status/control
● Status/control variable		Yes
● Variables		Inputs, outputs, memory bits, DB, times, counters
● Number of variables, max.		30
● of which status variables, max.		30
● of which control variables, max.		14
Forcing
● Forcing		Yes
● Force, variables		Inputs, outputs
● Number of variables, max.		10
Diagnostic buffer
● present		Yes
● Number of entries, max.		500
— can be set		No
— Of which powerfail-proof		100; Only the last 100 entries are retained
● Number of entries readable in RUN, max.		499
— can be set		Yes; From 10 to 499
— preset		10
Service data
● Can be read out		Yes
Ambient conditions
Operating temperature
● Min.		0 °C
● max.		60 °C
Configuration
Configuration software
● STEP 7		Yes; V5.5 or higher
programming
● Command set		see instruction list
● Nesting levels		8
● System functions (SFC)		see instruction list
● System function blocks (SFB)		see instruction list
Programming language
— LAD		Yes
— FBD		Yes
— STL		Yes
— SCL		Yes
— CFC		Yes
— GRAPH		Yes
— HiGraph®		Yes
Know-how protection
● User program protection/password protection		Yes
● Block encryption		Yes; With S7 block Privacy
Dimensions
Width		40 mm
Height		125 mm
Depth		130 mm
Weights
Weight, approx.		340 g
last modified:		13.10.2014

6ES7317-2EK14-0AB0

ProductArticle Number (Market Facing Number)6ES7317-2EK14-0AB0Product Description SIMATIC S7-300 CPU 317-2 PN/DP, Central processing unit with 1 MB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card requiredProduct familyCPU 317-2 PN/DPProduct Lifecycle (PLM)PM400:Phase Out StartedPLM Effective DateProduct phase-out since: 01.10.2023Price dataRegion Specific PriceGroup / Headquarter Price Group2AP / 2APList Price Show pricesCustomer Price Show pricesSurcharge for Raw MaterialsNoneMetal FactorNoneDelivery informationExport Control RegulationsAL : N / ECCN : EAR99HEstimated dispatch time1 Day/DaysNet Weight (kg)0,380 KgPackaging Dimension12,80 x 15,20 x 5,20Package size unit of measureCMQuantity Unit1 PiecePackaging Quantity1Additional Product InformationEAN4025515077794UPC040892550337Commodity Code85371091LKZ_FDB/ CatalogIDST73Product Group4302Group CodeR132Country of originGermanyCompliance with the substance restrictions according to RoHS directiveSince: 25.11.2009Product classA: Standard product which is a stock item could be returned within the returns guidelines/period.WEEE (2012/19/EU) Take-Back ObligationYesREACH Art. 33 Duty to inform according to the current list of candidates

Lead CAS-No. 7439-92-1 > 0, 1 % (w / w)

Information obligation imposed by Article 33, REACH Regulation: This product includes one or several articles in which the following substance of the candidate list is contained in concentrations higher than 0,1% weight by weight (w/w):

Lead

Based on the information currently available, we assume that these substances do not pose any risk if the articles are used as intended (including disposal). Please also refer to product documentation.

Lead monoxide (lead ... CAS-No. 1317-36-8 > 0, 1 % (w / w)

Lead monoxide (lead oxide)

Silicic acid, lead s... CAS-No. 11120-22-2 > 0, 1 % (w / w)

Silicic acid, lead salt

lblREACHCode0236 > 0, 1 % (w / w)

lblREACHCode0236

4,4'-isopropylidened... CAS-No. 80-05-7 > 0, 1 % (w / w)

4,4'-isopropylidenediphenol (Bisphenol A, BPA)

SCIP number35a28688-5b3a-452f-adca-25d06f029bf1Classifications

	Version	Classification
eClass	12	27-24-22-07
eClass	6	27-24-22-07
eClass	7.1	27-24-22-07
eClass	8	27-24-22-07
eClass	9	27-24-22-07
eClass	9.1	27-24-22-07
ETIM	7	EC000236
ETIM	8	EC000236
ETIM	9	EC000236
IDEA	4	3565
UNSPSC	15	32-15-17-05

6ES7317-2EK14-0AB0

SIMATIC S7-300 CPU 317-2 PN/DP, Central processing unit with 1 MB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required

★ ★ ★ ★ ★

12 views

5 star 0 (0%)

4 star 0 (0%)

3 star 0 (0%)

2 star 0 (0%)

1 star 0 (0%)

Reviews

All Reviews（0） Image/Video（0） star（0）